English
Language : 

ISL78227 Datasheet, PDF (10/43 Pages) Intersil Corporation – 2-Phase Boost Controller with Integrated Drivers
ISL78227
Electrical Specifications Refer to Figure 3 on page 7 and Typical Application Schematics (page 8). Operating conditions unless
otherwise noted: VIN = 12V, VPVCC = 5.2V and VVCC = 5.2V, TA = -40°C to +125°C (Note 7). Typicals are at TA = +25°C. Boldface limits apply across
the operating temperature range, -40°C to +125°C. (Continued)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
MAX
(Note 6) TYP (Note 6) UNIT
POWER-ON RESET (For both PVCC and VCC)
Rising VVCC POR Threshold
Falling VVCC POR Threshold
VVCC POR Hysteresis
Rising VPVCC POR Threshold
Falling VPVCC POR Threshold
VPVCC POR Hysteresis
Soft-Start Delay
EN
VPORH_VCC
VPORL_VCC
VPORHYS_VCC
VPORH_PVCC
VPORL_PVCC
VPORHYS_PVCC
tSS_DLY
From POR rising to initiation of soft-start.
RFSYNC = 61.9k, fSW = 200kHz, PLLCOMP
pin network of RPLL = 3.24k, CPLL1 = 6.8nF
and CPLL2 = 1nF
4.35
4.05
4.35
3.0
4.50
4.15
0.4
4.50
3.2
1.3
0.85
4.75 V
4.25 V
V
4.75 V
3.4
V
V
ms
Enable Threshold
Input Impedance
VENH
VENL
VEN_HYS
EN Rising
EN Falling
Hysteresis
EN = 4V
1.13
0.85
2
1.21
0.95
250
6
1.33 V
1.10 V
mV
MΩ
PWM SWITCHING FREQUENCY
PWM Switching Frequency (per phase)
Minimum Adjustable Switching Frequency
FOSC
RFSYNC = 249kΩ (0.1%)
RFSYNC = 82.5kΩ (0.1%)
RFSYNC = 40.2kΩ (0.1%)
RFSYNC = 10kΩ (0.1%)
46.0
142
290
990
50.2
150
300
1100
50
54.5 kHz
156 kHz
310 kHz
1170 kHz
kHz
Maximum Adjustable Switching Frequency
1100
kHz
FSYNC Pin Voltage
0.5
V
Minimum ON-Time (Blanking Time) on LGx
Maximum Duty Cycle
SYNCHRONIZATION (FSYNC PIN)
tMINON_1
tMINON_2
tMINON_3
tMINON_4
DMAX
Minimum duty cycle, CUG = CLG = OPEN
RBLANK = 80kΩ (0.1%)
Minimum duty cycle, CUG = CLG = OPEN
RBLANK = 50kΩ (0.1%)
Minimum duty cycle, CUG = CLG = OPEN
RBLANK = 25kΩ (0.1%)
Minimum duty cycle, CUG = CLG = OPEN
RBLANK = 10k
DMAX = T_LG_ ON/tSW, VCOMP = 3.5V,
fSW = 300kHz, RDT = 18.2kΩ, CUG = OPEN,
CLG = OPEN
315
175
100
75
88.5
410
260
140
90
89.0
525 ns
325 ns
180 ns
105 ns
90.5 %
Minimum Synchronization Frequency at FSYNC
Input
50
kHz
Maximum Synchronization Frequency at
FSYNC Input
1100
kHz
Input High Threshold
VIH
3.5
V
Input Low Threshold
VIL
1.5
V
Input Minimum Pulse Width - Rise-to-Fall
20
ns
Submit Document Feedback 10
FN8808.2
February 24, 2016