English
Language : 

80960CA-33 Datasheet, PDF (26/68 Pages) Intel Corporation – 80960CA-33, -25, -16 32-BIT HIGH-PERFORMANCE EMBEDDED PROCESSOR
◁
80960CA-33, -25, -16
4.4 DC Specifications
Table 15. DC Characteristics
(80960CA-33, -25, -16 under the conditions described in Section 4.2, Operating Conditions.)
Symbol
Parameter
Min
Max
Units
Notes
VIL
VIH
VOL
VOH
VILR
VIHR
ILI1
ILI2
ILI3
ILO
Input Low Voltage for all pins except RESET
– 0.3
+0.8
V
Input High Voltage for all pins except RESET
2.0
VCC + 0.3 V
Output Low Voltage
0.45
V IOL = 5 mA
Output High Voltage
IOH = –1 mA
2.4
V
IOH = – 200 µA VCC – 0.5
V
Input Low Voltage for RESET
– 0.3
1.5
V
Input High Voltage for RESET
3.5
VCC + 0.3 V
Input Leakage Current for each pin except:
BTERM, ONCE, DREQ3:0, STEST,
EOP3:0/TC3:0, NMI, XINT7:0, BOFF, READY,
HOLD, CLKMODE
±15
µA 0 ≤ VIN ≤ VCC (1)
Input Leakage Current for:
BTERM, ONCE, DREQ3:0, STEST,
EOP3:0/TC3:0, NMI, XINT7:0, BOFF
0
– 300
µA VIN = 0.45V (2)
Input Leakage Current for:
READY, HOLD, CLKMODE
0
500
µA VIN = 2.4V (3,7)
Output Leakage Current
±15
µA 0.45 ≤ VOUT ≤ VCC
ICC
Supply Current (80960CA-33):
ICC Max
ICCTyp
900
mA (4)
750
mA (5)
ICC
Supply Current (80960CA-25):
ICC Max
ICCTyp
750
mA (4)
600
mA (5)
ICC
Supply Current (80960CA-16):
ICC Max
ICCTyp
550
mA (4)
400
mA (5)
IONCE
CIN
ONCE-mode Supply Current
Input Capacitance for:
CLKIN, RESET, ONCE,
READY, HOLD, DREQ3:0, BOFF,
XINT7:0, NMI, BTERM, CLKMODE
100
mA
0
12
pF FC = 1 MHz
COUT Output Capacitance of each output pin
12
pF FC = 1 MHz (6)
CI/O
I/O Pin Capacitance
12
pF FC = 1 MHz
NOTES:
1. No pullup or pulldown.
2. These pins have internal pullup resistors.
3. These pins have internal pulldown resistors.
4. Measured at worst case frequency, VCC and temperature, with device operating and outputs loaded to the test conditions described in Sec-
tion 4.5.1, AC Test Conditions.
5. ICC Typical is not tested.
6. Output Capacitance is the capacitive load of a floating output.
7. CLKMODE pin has a pulldown resistor only when ONCE pin is deasserted.
22
 ▷