IA8044_10 Datasheet, PDF (36/65 Pages) InnovASIC, Inc – SDLC Communications Controller

IA8044/IA8344
SDLC Communications Controller
Data Sheet
March 30, 2010
Bit [3]—PT1 → (IP.3) Timer 1 interrupt priority bit
Bit [2]—PX1 → (IP.2) External Interrupt 1 interrupt priority bit
Bit [1]—PT0 → (IP.1) Timer 0 interrupt priority bit
Bit [0]—PX0 → (IP.0) External Interrupt 0 interrupt priority bit
4.9.7 Interrupt Enable Register (IE)
Table 30 presents the interrupt enable register, which contains the global interrupt enable bit and
individual interrupt enable bits. Setting a bit enables the corresponding interrupt.
Table 30. Interrupt Enable Register
7 65 4 3 2 1 0
EA – – ES ET1 EX1 ET0 EX0
Bit [7]—EA → (PCON.7) Enable all interrupts bit
Bit [6]—(PCON.6)
Bit [5]—(PCON.5)
Bit [4]—ES → (PCON.4) SIU interrupt enable bit
Bit [3]—ET1 → (PCON.3) Timer 1 interrupt enable bit
Bit [2]—EX1→ (PCON.2) External Interrupt 1 interrupt enable bit
Bit [1]—ET0→ (PCON.1) Timer 0 interrupt enable bit
Bit [0]—EX0→ (PCON.7) External Interrupt 0 interrupt enable bit
4.10 SIU—Serial Interface Unit
The SIU is a serial interface customized to support SDLC/HDLC protocol. As such, it supports
Zero Bit insertion/deletion, flags automatic access recognition and a 16-bit CRC. The SIU has
two modes of operation AUTO and FLEXIBLE. The AUTO mode uses a subset of the SDLC
protocol implemented in hardware. This frees the CPU from having to respond to every frame but
limits the frame types. In the FLEXIBLE mode every frame is under CPU control and therefore
more options are available. The SIU is controlled by and communicates to the CPU by using
several SFRs. Data transmitted by or received by the SIU is stored in the 192-byte internal RAM
in blocks referred to as the transmit and receive buffers. The SIU can support operation in one of
®
IA211010112-04
http://www.Innovasic.com
UNCONTROLLED WHEN PRINTED OR COPIED
Customer Support:
Page 36 of 65
1-888-824-4184