English
Language : 

TLE9221SX Datasheet, PDF (84/91 Pages) Infineon Technologies AG – FlexRay Transceiver
TLE9221SX
Application Information
16
Application Information
16.1
ESD Robustness according to IEC61000-4-2
Tests for ESD robustness according to IEC61000-4-2 “Gun test” (150 pF, 330 Ω) have been performed. The
results and test conditions are available in a separate test report.
Table 22 ESD robustness according to IEC61000-4-2
Performed Test
Symbol Result Unit
Electrostatic discharge voltage at pin BM, BP and uESDIEC ≥ +11 kV
WAKE versus GND,
CT index: 89, 1);
Electrostatic discharge voltage at pin BM, BP and uESDIEC ≤ -11 kV
WAKE versus GND,
CT index: 89:
Remarks
2), 3) Positive pulse
2), 3) Negative pulse
1) FlexRay Physical Layer Conformance Test Specification, version 3.0.1, chapter 5.2, static test cases, index number.
2) ESD susceptibility “ESD GUN” according to: “FlexRay Communications System Physical Layer - EMC Measurement
Specification, version 3.0, Section 2.2, IEC61000-4-2”.
Tested by external test facility (IBEE Zwickau, EMC test report no.: 22-02-13).
3) Test result without any external bus filter network, e.g. common mode choke.
16.2
Bus Interface Simulation Model Parameter
The simulated value RBDTransmitter describes the equivalent bus driver output impedance.
RBDTransmitter = 50Ω x ( uBus100 – uBus40 ) / ( 2.5 x uBus40 – uBus100 )
uBus100 =
differential output voltage on a 100Ω||100pF load,
while driving “Data_1” to the bus. Value based on simulation.
uBus40 =
differential output voltage on a 40Ω||100pF load,
while driving “Data_1” to the bus. Value based on simulation.
Figure 46 Bus driver output resistance
Table 23 Bus driver simulation resistor
Pos. Parameter
Symbol Limit Values
Unit Remarks
16.2.1 Bus driver interface
simulation resistor
Min.
RDBDTransmitter 30
Typ.
100
Max.
500 Ω
CT index: 98, 1), 2);
1) Simulated value for reference purposes only.
2) FlexRay Physical Layer Conformance Test Specification, version 3.0.1, chapter 5.2, static test cases, index number.
Data Sheet
84
Rev. 1.10, 2013-07-15