TLE9221SX Datasheet, PDF (4/91 Pages) Infineon Technologies AG – FlexRay Transceiver

FlexRay Transceiver
TLE9221SX
1
Overview
1.1
Features
General Features
• Compliant with the FlexRay Electrical Physical Layer
Specification, version 3.0.1
• Optimized for time-triggered in-vehicle networks with
data transmission rates from 1 Mbit/s up to 10 Mbit/s
• Optimized electromagnetic immunity (EMI)
• Very low electromagnetic emission (EME), supporting large
PG-SSOP16-2
networks and complex bus topologies
• Very high level of ESD robustness, 11 kV according to IEC-61000-4-2
• Supports 60 ns minimum bit time
• Optimized digital inputs to minimize jitter
• Integrated Bus Guardian Interface
• Bus failure protection and error detection
• Automatic voltage adaptation on the digital interface pins
• High current digital outputs, optimized to drive long wires and high capacitive loads
• Green Product (RoHS compliant)
• AEC Qualified (Conformance Test Index: 51¹⁾)
Modes of Operation and Wake-up Features
• Sleep and stand-by operation mode with very low quiescent current
• Receive-only mode
• Separate INH output to control external circuitry
• Local wake-up input
• Remote wake-up via a dedicated wake-up symbol
• Alternative remote wake-up
• Remote wake-up via payload
• Wake-up source recognition and indication
Protection and Diagnostics
• Short-circuit protection
• Overtemperature protection
• Undervoltage detection on all power supplies
1) FlexRay Physical Layer Conformance Test Specification, version 3.0.1, chapter 5.2, static test cases, index number.
Type
TLE9221SX
Data Sheet
Package
PG-SSOP16-2
4
Marking
9221
Rev. 1.10, 2013-07-15