TLE9221SX Datasheet, PDF (65/91 Pages) Infineon Technologies AG – FlexRay Transceiver

TLE9221SX
Electrical Characteristics
15
Electrical Characteristics
15.1
Functional Device Characteristics
Table 21 Electrical characteristics
5.5 V < uV_BAT < 18 V; 3.0 V < uV_IO < 5.25 V; 4.75 V < uV_CC < 5.25 V; R_DCLOAD = 45 Ω; C_DCLOAD = 100 pF;
-40 °C < T_Junction < 150 °C;
All voltages with respect to ground; positive current flowing into the pin; (unless otherwise specified)
Pos. Parameter
Symbol Limit Values
Unit Remarks
Min. Typ. Max.
Current Consumption uV_BAT Power Supply
15.1.1 Current consumption uV_BAT, iV_BAT
–
non-low power mode
15.1.2 Current consumption uV_BAT
BD_Sleep
iV_{BAT_Sleep40} –
5.5 6.5 mA BD_Normal,
BD_ReceiveOnly,
open load on INH,
uV_BAT = 13.5 V;
45
65 μA uV_BAT = 13.5 V,
uINH1 = 0 V,
EN = “low”, STBN = “low”,
T_Junction = 40° C,
uBDWake = 0 V;
15.1.3 Current consumption uV_BAT iV_{BAT_Stb}
–
70
180 μA uV_BAT = 13.5 V,
BD_Standby
open load on INH,
uBDWake = 0 V;
Current Consumption uV_CC Power Supply
15.1.10 Current consumption uV_CC iV_CC
BD_Normal
–
25 40 mA Transmitter = “Data_0” or
“Data 1”;
15.1.11 Current consumption uV_CC iV_{CC_Tx_Idle} –
BD_Normal
15.1.12 Current consumption uV_CC iV_{CC_ROM}
–
BD_ReceiveOnly
0.07 1
0.05 0.5
mA Transmitter = “Idle”,
uV_BAT = 13.5 V;
mA uV_BAT = 13.5 V;
15.1.13 Current consumption uV_CC
BD_Sleep
iV_{CC_Sleep40} –
15.1.14 Current consumption uV_CC iV_{CC_Stb}
–
BD_Standby
0.5 2
2
8
μA uV_CC = 5 V,
uV_BAT = 13.5 V,
T_Junction = 40°C;
μA uV_CC = 5 V,
uV_BAT = 13.5 V;
Data Sheet
65
Rev. 1.10, 2013-07-15