TC1775 Datasheet, PDF (81/101 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1775
Preliminary
Power Supply Current
T_A = -40 °C to +125 °C;
Parameter
Active mode supply
current
Symbol
I_DD CC
Idle mode supply current I_ID CC
Sleep mode supply
I_SL CC
current
Deep sleep mode
supply current
I_DS CC
Stand-by pin power
supply current
I_SB CC
Limit Values
min. typ.¹⁾ max.
––
250
– 266 320
– 36 –
–4
–
– 219 –
–
3⁴⁾
80⁵⁾
–4
–
– 80 200
– 50 160
–4
1000
–1
200
–1
120
Unit Test Conditions
mA PORST = V_IL2)3)
mA Sum of I_DDS4)
mA I_DD at V_DDP054)
mA I_DD at V_DDP8134)
mA I_DD at V_DD and
V_DDSRAM4)
mA I_DD at V_DDSB
mA I_DD at V_DDSC and
V_DDAx4)
mA PORST = V_IH1)2)6)7)
mA PORST = V_IH1)2)7)
µA PORST = V_IH8)
µA I_DD at V_DDSB9)
µA ¹⁰⁾
1) _{Parameters in this column are tested at 25 °C, 40 MHz system clock (if applicable) and nominal VDD voltages.}
2) _{These parameters are tested at VDDmax and 40 MHz system clock with all outputs disconnected and all inputs}
at V_IL or V_IH.
3) _{These power supply currents are defined as the sum of all currents at the VDD power supply lines:}
V_DD + V_DDP05 + V_DDP813 + V_DDSRAM + V_DDSB + V_DDPLL + V_DDOSC + V_DDSC + V_DDM + V_DDA0 + V_DDA1
4) _{These power consumption characteristics are measured while running a typical application pattern. The power}
consumption of modules can increase or decrease using other application programs. The PLL is inactive
during this measurement.
5) _{This parameter has been evaluated at design characterization using an untypical test pattern that makes}
extensive usage of the SBSRAM.
6) _{All peripherals are enabled and in idle state.}
7) _{Guaranteed by design characterization.}
8) _{IDS is the sum of all power supply currents except VDDSB.}
9) _{TC1775 in deep sleep mode.}
10) _{All other VDD pins are at 0V; TJ = 150 °C; VDDSB = 2.0 V.}
Data Sheet
77
V1.2, 2002-05