TC1775 Datasheet, PDF (69/101 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1775
Preliminary
Absolute Maximum Ratings
Parameter
Symbol Limit Values Unit
Ambient temperature
T_A
Storage temperature
T_A
Junction temperature
T_J
Voltage on Class A power supply V_DD
pins with respect to V_SS
Voltage on Class B and C power V_DD
supply pins with respect to V_SS
Voltage on power supply pins V_DD
“no pins assigned” with respect
to V_SS
Voltage on any Class A input pin V_IN
with respect to V_SS
Voltage on any Class B input pin V_IN
with respect to V_SS
Voltage on any Class C input pin V_IN
with respect to V_SS
Input current on any pin during I_IN
overload condition
Absolute sum of all input currents ΣI_IN
during overload condition
min.
-40
-65
–
-0.5
-0.5
-0.5
-0.5
-0.5
-0.5
-10
–
max.
125
°C
150
°C
150
°C
6.2
V
3.25
V
3.25
V
V_DD + 0.5 V
3.7
V
V_DDOSC V
+ 0.5
10
mA
|100|
mA
Notes
under bias
–
under bias
see
Table 10
–
–
–
–
–
–
–
Note: Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in
the operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
During absolute maximum rating overload conditions (V_IN > V_DD or V_IN < V_SS) the
voltage on V_DD pins with respect to ground (V_SS) must not exceed the values
defined by the absolute maximum ratings.
Data Sheet
65
V1.2, 2002-05