TLE75080-EMH Datasheet, PDF (47/80 Pages) Infineon Technologies AG – SPI Driver for Enhanced Relay Control

TLE75080-EMH
Power Stages
Table 10 Electrical Characteristics: Power Stage (cont’d)
V_DD = 3 V to 5.5 V, V_S = 7 V to 18 V, T_J = -40 °C to +150 °C (unless otherwise specified)
Typical values: V_DD = 5 V, V_S = 13.5 V, T_J = 25 °C
Parameter
Symbol
Values
Unit Note /
Min. Typ. Max.
Test Condition
Number
Turn-OFF slew rate
V_DS = 70% to 30% V_S
-dV/dt_OFF 0.7
1.3
1.9
V/µs R_L = 50 Ω
P_7.6.41
V_S = 13.5 V
Active mode or
Limp Home mode
Bulb Inrush Mode
restart time
t_INRUSH
–
–
40
µs
1)
Active mode
P_7.6.42
Bulb Inrush Mode
reset time
t_BIM
–
40
–
ms
1)
P_7.6.43
Active mode
PWM Generator
Internal reference frequency f_INT
Internal reference frequency f_INT(VAR)
variation
80
102 125 kHz HWCR_PWM.ADJ = P_7.6.44
1000_B
-15 –
15
%
1)
P_7.6.56
Internal reference frequency t_SYNC
synchronization time
–
5
10
µs
1)
P_7.6.45
HWCR_PWM.ADJ =
1000_B
1) Not subject to production test - specified by design
2) If one channel has I_L(NOM),max applied, the remaining channels must be underloaded accordingly so that T_J < 150°C
3) I_L(NOM),max can reach I_L(OVL1),min
Data Sheet
47
Rev. 1.0, 2016-06-22