TLE75080-EMH Datasheet, PDF (38/80 Pages) Infineon Technologies AG – SPI Driver for Enhanced Relay Control

TLE75080-EMH
Power Supply
Table 8 Electrical Characteristics Power Supply (cont’d)
V_DD = 3 V to 5.5 V, V_S = 7 V to 18 V, T_J = -40 °C to +150 °C, all voltages with respect to ground, positive currents
flowing as described in Figure 2 (unless otherwise specified)
Typical values: V_DD = 5 V, V_S = 13.5 V, T_J = 25 °C
Parameter
Symbol
Values
Unit Note /
Number
Min. Typ. Max.
Test Condition
Active to Limp Home delay t_ACTIVE2LH –
50
100
µs
1)
P_6.3.60
from IDLE pin to
TER + INST register
= 8683_H (IN0 = IN1
= “high”) or
8682_H(IN1 = “high”,
IN0 = “low”) or
8681_H (IN1 = “low”,
IN0 = “high”) (see
Chapter 10.5 for
details)
Active to Sleep delay
t_ACTIVE2SLEEP –
50
100
µs
1)
P_6.3.61
from IDLE pin to
Standard Diagnosis
= 0000_H (see
Chapter 10.6.1 for
details). External
pull-down SO to
GND required.
1) Not subject to production test - specified by design
Data Sheet
38
Rev. 1.0, 2016-06-22