English
Language : 

TLE75008-EMD_15 Datasheet, PDF (33/64 Pages) Infineon Technologies AG – SPI Driver for Enhanced Relay Control
◁
TLE75008-EMD
Power Supply
Table 8 Electrical Characteristics Power Supply (cont’d)
VDD = 3 V to 5.5 V, VS = 7 V to 18 V, TJ = -40 °C to +150 °C, all voltages with respect to ground, positive currents
flowing as described in Figure 2 (unless otherwise specified)
Typical values: VDD = 5 V, VS = 13.5 V, TJ = 25 °C
Parameter
Symbol
Values
Unit Note /
Number
Min. Typ. Max.
Test Condition
Logic supply current in Active IVDD(ACTIVE) –
–
4.2 mA IDLE = “high”
P_6.3.31
mode - channels OFF (COR)
VINn floating
fSCLK = 0 MHz
HWCR.ACT = 1B
OUT.OUTn = 0B
VCSN = VDD
VS ≤ VDD - 1 V
Logic supply current in Active IVDD(ACTIVE) –
–
0.3 mA IDLE = “high”
P_6.3.35
mode - channels ON
VINn floating
fSCLK = 0 MHz
HWCR.ACT = 1B
OUT.OUTn = 1
VCSN = VDD
Logic supply current in Active IVDD(ACTIVE) –
–
4.2 mA IDLE = “high”
P_6.3.36
mode - channels ON (COR)
VINn floating
fSCLK = 0 MHz
HWCR.ACT = 1B
OUT.OUTn = 1B
VCSN = VDD
VS ≤ VDD - 1 V
Overall current consumption
Overall current consumption ISLEEP
–
–
5
µA
1)
in Sleep mode
VIDLE floating
I I VS(SLEEP) + VDD(SLEEP)
VINn floating
VCSN = VDD
TJ ≤ 85 °C
Overall current consumption ISLEEP
–
–
5
µA
1)
in Sleep mode
VIDLE floating
I I VS(SLEEP) + VDD(SLEEP)
VINn floating
VCSN = VDD
TJ ≤ 85 °C
VS = 13.5 V
Overall current consumption ISLEEP
–
–
30
µA VIDLE floating
in Sleep mode
VINn floating
I I VS(SLEEP) + VDD(SLEEP)
VCSN = VDD
TJ = 150 °C
P_6.3.40
P_6.3.64
P_6.3.41
Data Sheet
33
Rev. 1.1, 2015-09-25
 ▷