TLE75008-EMD_15 Datasheet, PDF (16/64 Pages) Infineon Technologies AG – SPI Driver for Enhanced Relay Control

TLE75008-EMD
General Product Characteristics
Notes
1. Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
2. Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are not
designed for continuous repetitive operation.
4.2
Functional Range
Table 3 Functional range
Parameter
Symbol
Min.
Supply Voltage Range for
V_S(NOR)
7
Normal Operation
Upper Supply Voltage Range V_S(EXT,UP) 18
for Extended Operation
Lower Supply Voltage Range V_S(EXT,LOW) 3
for Extended Operation
Junction Temperature
T_J
-40
Logic supply voltage
V_DD
3
Values
Typ. Max.
–
18
–
28
–
7
–
150
–
5.5
Unit Note /
Test Condition
V
–
Number
P_4.2.1
V
Parameter deviation P_4.2.2
possible
V
Parameter deviation P_4.2.3
possible
°C –
P_4.2.4
V
–
P_4.2.5
Note: Within the functional or operating range, the IC operates as described in the circuit description. The electrical
characteristics are specified within the conditions given in the Electrical Characteristics table.
Data Sheet
16
Rev. 1.1, 2015-09-25