TLE75008-EMD_15 Datasheet, PDF (14/64 Pages) Infineon Technologies AG – SPI Driver for Enhanced Relay Control

4
General Product Characteristics
TLE75008-EMD
General Product Characteristics
4.1
Absolute Maximum Ratings
Table 2 Absolute Maximum Ratings ¹⁾
T_J = -40 °C to +150 °C
all voltages with respect to ground, positive current flowing into pin (unless otherwise specified)
Parameter
Symbol
Values
Min. Typ. Max.
Unit Note /
Test Condition
Number
Supply Voltages
Analog Supply voltage
Digital Supply voltage
Supply voltage for load dump
protection
V_S
V_DD
V_S(LD)
-0.3 – 28
-0.3 – 5.5
–
– 42
V
–
V
–
V
2)
P_4.1.1
P_4.1.2
P_4.1.3
Supply voltage for short circuit V_S(SC)
0
protection (single pulse)
Reverse polarity voltage
-V_S(REV) –
– 28
– 16
V
–
P_4.1.4
V
3)
P_4.1.5
T_J(0) = 25 °C
t ≤ 2 min
See Chapter 11 for
general setup.
R_L = 70 Ω on all
channels
Current through VS pin
Current through VDD pin
Power Stages
I_VS
-10
– 10
mA t ≤ 2 min
I_VDD
-50
– 10
mA t ≤ 2 min
P_4.1.7
P_4.1.8
Load current
|I_L|
Voltage at power transistor
V_DS
Maximum energy dissipation
E_AS
single pulse
Maximum energy dissipation
E_AS
single pulse
Maximum energy dissipation
E_AR
repetitive pulses - I_L(EAR)
–
–
I_L(OVL0) A
single channel
-0.3 – 42
V
–
–
– 50
mJ
4)
T_J(0) = 25 °C
I_L(0) = 2*I_L(EAR)
–
– 25
mJ
4)
T_J(0) = 150 °C
I_L(0) = 400 mA
–
– 10
mJ
4)
T_J(0) = 85 °C
I_L(0) = I_L(EAR)
2*10⁶ cycles
P_4.1.9
P_4.1.10
P_4.1.13
P_4.1.14
P_4.1.15
IDLE pin
Voltage at IDLE pin
Current through IDLE pin
Current through IDLE pin
V_IDLE
I_IDLE
I_IDLE
-0.3
-0.75
-10.0
5.5
V
–
0.75 mA –
2.0
mA t ≤ 2 min.
P_4.1.23
P_4.1.25
P_4.1.26
Data Sheet
14
Rev. 1.1, 2015-09-25