|
PTFC270051M Datasheet, PDF (14/14 Pages) Infineon Technologies AG – High Power RF LDMOS Field Effect Transistor 5 W, 28 V, 900 – 2700 MHz | |||
|
◁ |
PTFC270051M V2
Revision History
Revision Date
Data Sheet
01
2015-03-20 Production
01.1
2016-07-26 Production
Page
All
2
Subjects (major changes since last revision)
Speciï¬cations and performance represent released product.
Add ordering information for additional evaluation boards.
We Listen to Your Comments
Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to:
(highpowerRF@inï¬neon.com)
To request other information, contact us at:
+1 877 465 3667 (1-877-GO-LDMOS) USA
or +1 408 776 0600 International
Edition 2016-07-26
Published by
Inï¬neon Technologies AG
85579 Neubiberg, Germany
© 2015 Inï¬neon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics.
With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the
application of the device, Inï¬neon Technologies hereby disclaims any and all warranties and liabilities of any kind,
including without limitation, warranties of non-infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Inï¬neon Technologies Ofï¬ce (www.inï¬neon.com/rfpower).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in question,
please contact the nearest Inï¬neon Technologies Ofï¬ce.
Inï¬neon Technologies components may be used in life-support devices or systems only with the express written approval of In-
ï¬neon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device
or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be
implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.
Data Sheet
14 of 14
Rev. 01.1, 2016-07-26
|