English
Language : 

HMC700LP4 Datasheet, PDF (4/36 Pages) Hittite Microwave Corporation – 8 GHz 16-Bit Fractional-N PLL
v07.0411
HMC701LP6CE
8 GHz 16-Bit Fractional-N PLL
Table 1. Electrical Specifications (Continued)
Parameter
Temperature Sensor (3-bit)
Min Temperature
Max Temperature
Temp Change / LSB
Worst Case Absolute Temp Error
Current Consumption (when Enabled)
Power on Reset
Typical Reset Voltage on DVDD
Min DVDD Voltage for No Reset
Closed Loop Phase Noise
6 GHz VCO, Integer, 50 MHz PFD
6 GHz VCO, Integer, 50 MHz PFD
6 GHz VCO, Integer, 50 MHz PFD
6 GHz VCO, Fractional, 50 MHz PFD
6 GHz VCO, Fractional, 50 MHz PFD
6 GHz VCO, Fractional, 50 MHz PFD
Closed Loop Phase Noise
Integer Mode
Fractional Mode
Conditions / Notes
Readout: 000
Readout: 111
1 kHz offset
10 kHz offset
100 kHz offset
1 kHz offset
10 kHz offset
100 kHz offset
Normalized to 1 Hz
Measured with 50 MHz PFD
Measured with 50 MHz PFD
Min
Typ
Max
Units
-32
°C
+82
°C
17.5
°C/LSB
±10
°C
2
mA
700
mV
1.5
V
-98
dBc/Hz
-108
dBc/Hz
-110
dBc/Hz
-93
dBc/Hz
-103
dBc/Hz
-105
dBc/Hz
-227
-221
dBc/Hz
dBc/Hz
0
Table 2. Absolute Maximum Ratings
Parameter
Rating
RVDD, VCCHF, DVDD,
DVDDQ, VCCPRS
-0.3 to +3.6V
VCCOA, VPPCP, VPPDRV, VDDPD,
VDDPDV, VDDPDR, DVDDIO
-0.3 to +6V
Operating Temperature
-40 to +85 °C
Storage Temperature
-65 to +120 °C
Maximum Junction Temperature
+125 °C
Thermal Resistance (Rth)
20°C/W
Reflow Soldering
Peak Temperature
260 °C
Time at Peak Temperature
40 sec
ESD Sensitivity (HBM)
Class 1B
Stresses above those listed under Absolute Maximum
Ratings may cause permanent damage to the device. This
is a stress rating only; functional operation of the device
at these or any other conditions above those indicated in
the operational section of this specification is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
978-250-3343 tel • 978-250-3373 fax • Order On-line at www.hittite.com
Application Support: apps@hittite.com
0-4