|
V2-EVAL Datasheet, PDF (49/64 Pages) Future Technology Devices International Ltd. – Vinculum II Evaluation Board | |||
|
◁ |
Document Reference No.: FT_000247
V2-EVAL Vinculum II Evaluation Board Datasheet Version 2.0
Clearance No.: FTDI#148
4. Next open a connection to the âSpyâ channel on the V2-EVAL board. From the Vinculum logo pull
down menu, select âConnect to UART->VII Eval Board Câ to open the UART connection to channel
C on the FT4232H.
Figure 8.5: Connect to âSpyâ channel on V2-EVAL board
The V2-EVAL board and software is now ready to display âSpyâ data being sent to the VNC2 device
from an external device.
An example displaying âSpyâ mode operation is shown in Figure 8.6. The example displays âSpyâ
mode operation with an FTDI USB to 3.3V TTL level UART cable connected to the V2-EVAL board
via connector CN10. The terminal connection on the right represents the terminal connection for
the FTDI TTL USB cable showing data being transmitted from this console to the V2-EVAL
terminal utility in the background.
Figure 8.6: âSpyâ mode operation
Copyright © 2010 Future Technology Devices International Limited
48
|
▷ |