V2-EVAL Datasheet, PDF (37/64 Pages) Future Technology Devices International Ltd. – Vinculum II Evaluation Board

5.19
Document Reference No.: FT_000247
V2-EVAL Vinculum II Evaluation Board Datasheet Version 2.0
Clearance No.: FTDI#148
VNC2 Daughterboard Connector – J3
16
1
Figure 5.24
VNC2 Daughterboard Connector J3
Schematic Connector
VCN2 Pin No
Signal Name⁽⁴⁵⁾
Pin
32-PIN 48-PIN 64-PIN
PROG#
1
9
10
10
RESET#
SPI_M_CS#
2
10
9
9
3
-
23
64
IO
type
Description
Input
Input
IO
PROG# input to VNC2. Connected via
multiplexer U4.
RESET# input to VNC2. Connected via
multiplexer U4.
Connected to P1 pin 52 / CN9 pin 7/ CN8 pin 4.
SPI_M_MISO
4
-
22
63
IO Connected to P1 pin 51 / CN9 pin 6/ CN8 pin 3.
SPI_M_MOSI
5
-
21
62
IO Connected to P1 pin 47 / CN9 pin 5/ CN8 pin 2.
SPI_M_CLK
6
-
20
61
IO Connected to P1 pin 46 / CN9 pin 4/ CN8 pin 1.
XTOUT
7
5
5
5
Output Output from 12MHz oscillator cell on VNC2.
XTIN
8
4
4
4
Input Input to 12MHz oscillator cell on VNC2.
GPIO2
9
14
13
13
IO Connected to P1 pin 6 / CN3 pin 3.
GPIO1
10
12
12
12
IO Connected to P1 pin 5 / CN3 pin 2.
FIFO_DATA0
11
-
-
15
IO Connected to P1 pin 8/CN3 pin 5 /CN11 pin 1.
GPIO3
12
15
14
14
IO Connected to P1 pin 7 / CN3 pin 4.
FIFO_DATA2
13
-
-
17
IO Connected to P1 pin 10/CN3 pin 7 /CN11 pin 3.
FIFO_DATA1
14
-
-
16
IO Connected to P1 pin 9/CN3 pin 6 /CN11 pin 2.
GND
15
-
-
-
- Ground pin.
GND
16
-
-
-
- Ground pin.
Notes:
(45) The signal names relate to the labels used on pages 1 & 2 of the V2-EVAL base board schematic. Unless
otherwise stated, the function of the IO signals is set by the user application running on the VNC2.
Table 5.20 Connector J3 Pinout
Copyright © 2010 Future Technology Devices International Limited
36