V2-EVAL Datasheet, PDF (46/64 Pages) Future Technology Devices International Ltd. – Vinculum II Evaluation Board

Document Reference No.: FT_000247
V2-EVAL Vinculum II Evaluation Board Datasheet Version 2.0
Clearance No.: FTDI#148
8 V2-EVAL Software
The following section details instructions on how to install and use the V2-EVAL software terminal utility
for the V2-EVAL board.
8.1
V2-EVAL Terminal Installation
A simple terminal application has been designed for use with the VNC2 V2-EVAL board. The application
can be downloaded as part of the Vinculum II utilities available from:
http://www.ftdichip.com/Firmware/VNC2tools.htm
Note:
The V2-EVAL terminal software is only supported under WindowXP, Vista and Windows 7
Operating Systems.
To install the terminal application, simply double click on the installer and follow the installation
instructions shown.
Figure 8.1: Installer Introduction Screen
Once installation is complete, the V2-EVAL application can be found and launched from „Start -> „All
Programs -> FTDI -> Vinculum II Utilities‟ location.
Copyright © 2010 Future Technology Devices International Limited
45