V2-EVAL Datasheet, PDF (11/64 Pages) Future Technology Devices International Ltd. – Vinculum II Evaluation Board

Document Reference No.: FT_000247
V2-EVAL Vinculum II Evaluation Board Datasheet Version 2.0
Clearance No.: FTDI#148
3.1.2 Interfaces.
Component
USB1, USB2 ⁽¹⁾
Board designator Description
CN1, CN2
VNC2 USB host ports 1&2.
USB Type B
CN13
FT4232H USB Slave connection.
VNC2 Socket
J1 -J4
Daughterboard connectors for VNC2 Daughterboard.
SPI ⁽²⁾
CN9
VNC2 SPI interface pins.
UART ⁽²⁾
CN10
VNC2 UART interface pins.
FIFO ⁽²⁾
CN11
VNC2 FIFO interface pins.
IOBUS[7..0] ⁽²⁾
CN3
VNC2 IOBUS [7:0] port pins.
IOBUS[8..15] ⁽²⁾
CN4
VNC2 IOBUS [8:15] port pins.
IOBUS[16..23] ⁽²⁾
CN5
VNC2 IOBUS [16:23] port pins.
IOBUS[24..31] ⁽²⁾
CN6
VNC2 IOBUS [24:31] port pins.
IOBUS[32..39] ⁽²⁾
CN7
VNC2 IOBUS [32:39] port pins.
IOBUS[40..43] ⁽²⁾
CN8
VNC2 IOBUS [40:43] port pins.
Prototyping area ⁽²⁾
P1
All of VNC2 IO ports and PROG#, RESET# pins are
brought on to this area.
Notes
(1) Gender changer required when ports are configured as slave ports by VNC2 firmware,
to enable connection to a USB host port.
(2) Those pins are shared between different areas and connectors on the board. You can
use only one device at time connected to those pins.
Table 3.2 V2-Eval Board Interfaces
Copyright © 2010 Future Technology Devices International Limited
10