V2-EVAL Datasheet, PDF (32/64 Pages) Future Technology Devices International Ltd. – Vinculum II Evaluation Board

Document Reference No.: FT_000247
V2-EVAL Vinculum II Evaluation Board Datasheet Version 2.0
Clearance No.: FTDI#148
5.13 Host USB power jumpers JP4, JP5.
Figure 5.18
USB Power Enable Jumpers JP4 and JP5
When either USB1 and/or USB2 ports are used as a host ports, the jumpers JP4 and/or JP5 accordingly
should be closed to allow peripheral devices to draw power from board‟s +5V power rail.
Warning!
When using USB1 and USB2 ports as a USB slave ports, remove the shunts from jumpers JP4
and JP5. Failure to do so could cause damage to the USB host or to the V2-EVAL board.
Copyright © 2010 Future Technology Devices International Limited
31