V2-EVAL Datasheet, PDF (4/64 Pages) Future Technology Devices International Ltd. – Vinculum II Evaluation Board

Document Reference No.: FT_000247
V2-EVAL Vinculum II Evaluation Board Datasheet Version 2.0
Clearance No.: FTDI#148
1 Introduction
The following document details the features and specifications of the V2-EVAL board. The V2-EVAL is a
hardware platform designed to support easy evaluation of FTDI‟s Vinculum-II (VNC2) series of
embedded USB host controller devices.
The V2-Eval kit includes the following hardware items as standard
 1 x V2-Eval base board.
 1 x 5V/1A mains adapter PSU – UK, US, European and Japanese versions available.
 1 x USB A/B cable to connect to a host PC in programming / terminal emulation or debugging
modes.
 1 x USB gender changer for USB slave mode applications.
NOTE:
The V2-EVAL kit requires a VNC2 based daughterboard module to be installed into the V2-EVAL
base board socket site, in order to enable development with the kit.
Daughterboard modules are sold separately, with 3 versions available for 32-pin, 48-pin and 64-pin
package devices. Daughterboard modules can be purchased from FTDI or via our website
http://www.ftdichip.com.
Before you proceed:
Please check that all the contents of the package are not damaged.
Ensure that your kit includes a proper version of the power supply, depending on the region where you
live. Eval application software and project examples can be downloaded from: http://www.ftdichip.com
1.1
Handling the board
Static discharge precaution – Without proper anti-static handling the board can be damaged.
Therefore, take anti-static precautions while handling the board.
1.2
Environmental requirements
The V2-Eval Board must be stored between -40°C and 80°C. The recommended operating temperature is
between 0°C and 55°C
Figure 1.1 - V2-EVAL Motherboard(left) with Daughterboard Module(right)
Copyright © 2010 Future Technology Devices International Limited
3