33888 Datasheet, PDF (9/40 Pages) Freescale Semiconductor, Inc – Quad High-Side and Octal Low-Side Switch for Automotive

ELECTRICAL CONNECTIONS
MAXIMUM RATINGS
Table 4. Maximum Ratings (continued)
All voltages are with respect to ground unless otherwise noted. Exceeding these ratings may cause a malfunction or
permanent damage to the device.
Ratings
Symbol
Value
Unit
THERMAL RATINGS
Operating Temperature
Ambient
Junction
Storage Temperature
Control Die Thermal Resistance ⁽⁸⁾
PQFP
One Low-Side ON
Two Low-Side ON
Three Low-Side ON
Four Low Side ON
All Low-Sides ON
PQFN
One Low-Side ON
Two Low-Side ON
Three Low-Side ON
Four Low Side ON
All Low-Sides ON
Power Die Thermal Resistance ⁽⁸⁾
PQFP
One High-Side 2, 3 ON
All High-Sides ON
PQFN
One High-Side 2, 3 ON
All High-Sides ON
Thermal Resistance, Junction to Ambient, Natural Convection,
Four-Layer Board ⁽⁸⁾
PQFP
PQFN
Peak Package Reflow Temperature During Reflow ^{(9), (10)}
T_A
T_J
T_STG
R_θCJC
R_θPJC
R_θJA
T_PPRT
- 40 to 125
- 40 to 150
- 55 to 150
12.5
9.3
7.3
5.9
3.2
8.6
6.0
4.6
3.8
2.0
0.5
0.15
0.5
0.1
33
37
Note 10
°C
°C
°C/W
°C/W
°C/W
°C
Notes
8. Board dimensions are 8.0 cm x 8.0 cm x 1.5 mm with a 300 mm² copper area on the bottom layer.
9. Pin soldering temperature limit is for 10 seconds maximum duration. Not designed for immersion soldering. Exceeding these limits may
cause malfunction or permanent damage to the device.
10. Freescale’s Package Reflow capability meets Pb-free requirements for JEDEC standard J-STD-020C. For Peak Package Reflow
Temperature and Moisture Sensitivity Levels (MSL),
> Go to www.freescale.com
> Search by part number [e.g. remove prefixes/suffixes and enter the core ID to view all orderable parts. (i.e. MC33xxxD enter 33xxx)]
> Locate your Part Number and in the Details column, select “View”
> Select “Environmental and Compliance Information”
Analog Integrated Circuit Device Data
Freescale Semiconductor
33888
9