S9S12G64F0CLF Datasheet, PDF (731/1292 Pages) Freescale Semiconductor, Inc – Reference Manual and Data Sheet

Chapter 22
Timer Module (TIM16B6CV3)
Table 22-1.
V03.00
V03.01
V03.02
V03.03
Jan. 28, 2009
Initial version
Aug. 26, 2009 22.1.2/22-733 - Correct typo: TSCR ->TSCR1;
22.3.2.2/22-737, - Correct typo: ECTxxx->TIMxxx
22.4.3/22-749
Apri,12,2010
22.3.2.6/22-740 -update TCRE bit description
22.3.2.9/22-742
22.4.3/22-749
Jan,14,2013
-single source generate different channel guide
22.1 Introduction
The basic scalable timer consists of a 16-bit, software-programmable counter driven by a flexible
programmable prescaler.
This timer can be used for many purposes, including input waveform measurements while simultaneously
generating an output waveform.
This timer could contain up to 6 input capture/output compare channels . The input capture function is used
to detect a selected transition edge and record the time. The output compare function is used for generating
output signals or for timer software delays.
A full access for the counter registers or the input capture/output compare registers should take place in
one clock cycle. Accessing high byte and low byte separately for all of these registers may not yield the
same result as accessing them in one word.
22.1.1 Features
The TIM16B6CV3 includes these distinctive features:
• Up to 6 channels available. (refer to device specification for exact number)
• All channels have same input capture/output compare functionality.
• Clock prescaling.
• 16-bit counter.
22.1.2 Modes of Operation
Stop:
Timer is off because clocks are stopped.
MC9S12G Family Reference Manual, Rev.1.23
Freescale Semiconductor
733