MC68HC05P4A Datasheet, PDF (59/72 Pages) Advanced Analogic Technologies – Microcontrollers

Chapter 12
Electrical Specifications
12.1 Introduction
This section contains electrical and timing specifications.
12.2 Maximum Ratings
Maximum ratings are the extreme limits to which the microcontroller unit (MCU) can be exposed without
permanently damaging it.
The MCU contains circuitry to protect the inputs against damage from high static voltages; however, do
not apply voltages higher than those shown in the table here. Keep V_In and V_Out within the range
V_SS ≤ (V_In or V_Out) ≤ V_DD. Connect unused inputs to the appropriate voltage level, either V_SS or V_DD
Supply voltage
Input voltage
Rating
Self-check mode (IRQ pin only)
Current drain per pin excluding V_DD and V_SS
Storage temperature range
Symbol
V_DD
V_In
V_In
I
T_stg
Value
–0.3 to + 7.0
V_SS –0.3 to
V_DD + 0.3
V_SS –0.3 to
2 x V_DD +0.3
25
–65 to + 150
Unit
V
V
V
mA
°C
NOTE
This device is not guaranteed to operate properly at the maximum ratings.
Refer to 12.5 5.0-Volt DC Electrical Characteristics and 12.6 3.3-Volt DC
Electrical Characteristics for guaranteed operating conditions.
12.3 Operating Range
Characteristic
Operating temperature range
MC68HC05P4AP (standard)
MC68HC05P4ACP (extended)
Symbol
T_A
Value
Unit
T_L to T_H
0 to +70
°C
–40 to +85
12.4 Thermal Characteristics
Thermal resistance
Plastic DIP
Plastic SOIC
Characteristic
Symbol
θ_JA
Value
60
71
Unit
°C/W
MC68HC05P4A Data Sheet, Rev. 7.1
Freescale Semiconductor
59