MC9S08AC16_0911 Datasheet, PDF (3/336 Pages) Freescale Semiconductor, Inc – HCS08 Microcontrollers

MC9S08AC16 Series Features
MC9S08AC16 Series Devices
• Consumer & Industrial
— MC9S08AC16
— MC9S08AC8
• Automotive
— MC9S08AW16A
— MC9S08AW8A
8-Bit HCS08 Central Processor Unit (CPU)
• 40-MHz HCS08 CPU (central processor unit)
• 20-MHz internal bus frequency
• HC08 instruction set with added BGND
instruction
• Background debugging system
• Breakpoint capability to allow single breakpoint
setting during in-circuit debugging (plus two
more breakpoints in on-chip debug module)
• Debug module containing two comparators and
nine trigger modes. Eight deep FIFO for storing
change-of-flow addresses and event-only data.
Debug module supports both tag and force
breakpoints.
• Support for up to 32 interrupt/reset sources
Memory Options
• Up to 16 KB of on-chip in-circuit programmable
FLASH memory with block protection and
security options
• Up to 1 KB of on-chip RAM
Clock Source Options
• Clock source options include crystal, resonator,
external clock, or internally generated clock
with precision NVM trimming
System Protection
• Optional computer operating properly (COP)
reset with option to run from independent
internal clock source or bus clock
• Low-voltage detection with reset or interrupt
• Illegal opcode detection with reset
• Illegal address detection with reset
Power-Saving Modes
• Wait plus two stops
Peripherals
• ADC — 8-channel, 10-bit analog-to-digital
converter with automatic compare function
• SCI — Two serial communications interface
modules with optional 13-bit break
• SPI — Serial peripheral interface module
• IIC — Inter-integrated circuit bus module to
operate at up to 100 kbps with maximum bus
loading; capable of higher baud rates with
reduced loading
• Timers — Three 16-bit timer/pulse-width
modulator (TPM) modules — Two 2-channel
and one 4-channel; each has selectable input
capture, output compare, and edge-aligned
PWM capability on each channel. Each timer
module may be configured for buffered,
centered PWM (CPWM) on all channels
• KBI — 7-pin keyboard interrupt module
Input/Output
• Up to 38 general-purpose input/output (I/O)
pins
• Software selectable pullups on ports when used
as inputs
• Software selectable slew rate control on ports
when used as outputs
• Software selectable drive strength on ports
when used as outputs
• Master reset pin and power-on reset (POR)
• Internal pullup on RESET, IRQ, and BKGD/MS
pins to reduce customer system cost
Package Options
• 48-pin quad flat no-lead package (QFN)
• 44-pin low-profile quad flat package (LQFP)
• 42-pin shrink dual-in-line package (SDIP)
• 32-pin low-profile quad flat package (LQFP)