K60P144M100SF2V2 Datasheet, PDF (12/80 Pages) Freescale Semiconductor, Inc – K60 Sub-Family

General
Symbol Description
Min.
Max.
Unit
I_DD
Digital supply current
—
185
mA
V_DIO
Digital input voltage (except RESET, EXTAL, and XTAL)
–0.3
5.5
V
V_AIO
Analog¹, RESET, EXTAL, and XTAL input voltage
–0.3
V_DD + 0.3
V
I_D
Maximum current single pin limit (applies to all port pins)
–25
25
mA
V_DDA
Analog supply voltage
V_DD – 0.3
V_DD + 0.3
V
V_{USB_DP} USB_DP input voltage
–0.3
3.63
V
V_{USB_DM} USB_DM input voltage
–0.3
3.63
V
VREGIN USB regulator input
–0.3
6.0
V
V_BAT
RTC battery supply voltage
–0.3
3.8
V
1. Analog pins are defined as pins that do not have an associated general purpose I/O port function.
5 General
5.1 AC electrical characteristics
Unless otherwise specified, propagation delays are measured from the 50% to the 50%
point, and rise and fall times are measured at the 20% and 80% points, as shown in the
following figure.
Figure 1. Input signal measurement reference
All digital I/O switching characteristics assume:
1. output pins
• have C_L=30pF loads,
• are configured for fast slew rate (PORTx_PCRn[SRE]=0), and
• are configured for high drive strength (PORTx_PCRn[DSE]=1)
2. input pins
• have their passive filter disabled (PORTx_PCRn[PFE]=0)
K60 Sub-Family Data Sheet, Rev. 1, 6/2012.
12
Preliminary
Freescale Semiconductor, Inc.
General Business Information