KX022-1020 Datasheet, PDF (73/75 Pages) List of Unclassifed Manufacturers – Accelerometer Specifications

± 2g / 4g / 8g Tri-axis Digital
Accelerometer Specifications
PART NUMBER:
KX022-1020
Rev. 11.0
10-Sep-15
power exceeding normal rated power; exceeding the power rating under steady-state loading condition may
negatively affect product performance and reliability.
7. De-rate Power Dissipation (Pd) depending on ambient temperature (Ta). When used in sealed area, confirm the
actual ambient temperature.
8. Confirm that operation temperature is within the specified range described in the product specification.
9. KIONIX shall not be in any way responsible or liable for failure induced under deviant condition from what is
defined in this document.
Precaution for Mounting / Circuit board design
1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect
product performance and reliability.
2. In principle, the reflow soldering method must be used; if flow soldering method is preferred, please consult with
the KIONIX representative in advance.
For details, please refer to KIONIX Mounting specification.
Precautions Regarding Application Examples and External Circuits
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of
the characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2. You agree that application notes, reference designs, and associated data and information contained in this
document are presented only as guidance for Products use. Therefore, in case you use such information, you are
solely responsible for it and you must exercise your own independent verification and judgment in the use of such
information contained in this document. KIONIX shall not be in any way responsible or liable for any damages,
expenses or losses incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take
proper caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating
will not be applied to Products. Please take special care under dry condition (e.g. Grounding of human body /
equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature /
humidity control).
Precaution for Storage / Transportation
1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:
a) the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2
b) the temperature or humidity exceeds those recommended by KIONIX
c) the Products are exposed to direct sunshine or condensation
d) the Products are exposed to high Electrostatic
2. Even under KIONIX recommended storage condition, solderability of products out of recommended storage time
period may be degraded. It is strongly recommended to confirm solderability before using Products of which
storage time is exceeding the recommended storage time period.
3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent
leads may occur due to excessive stress applied when dropping of a carton.
4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using
Products of which storage time is exceeding the recommended storage time period.
36 Thornwood Dr. – Ithaca, NY 14850
tel: [phone] – fax:[phone]
www.kionix.com - [e-mail]
© 2015 Kionix – All Rights Reserved
Page 73 of 75