KX022-1020 Datasheet, PDF (72/75 Pages) List of Unclassifed Manufacturers – Accelerometer Specifications

± 2g / 4g / 8g Tri-axis Digital
Accelerometer Specifications
PART NUMBER:
KX022-1020
Rev. 11.0
10-Sep-15
Notice
Precaution on using KIONIX Products
1. Our Products are designed and manufactured for application in ordinary electronic equipment (such as AV
equipment, OA equipment, telecommunication equipment, home electronic appliances, amusement equipment,
etc.). If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment
(Note 1), transport equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car
equipment including car accessories, safety devices, etc.) and whose malfunction or failure may cause loss of
human life, bodily injury or serious damage to property (“Specific Applications”), please consult with the KIONIX
sales representative in advance. Unless otherwise agreed in writing by KIONIX in advance, KIONIX shall not be
in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from
the use of any KIONIX’s Products for Specific Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU
CHINA
CLASSⅢ
CLASSⅣ
CLASSⅢ
CLASSⅡb
CLASSⅢ
CLASSⅢ
2. KIONIX designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities,
adequate safety measures including but not limited to fail-safe design against the physical injury, damage to any
property, which a failure or malfunction of our Products may cause. The following are examples of safety
measures:
a) Installation of protection circuits or other protective devices to improve system safety
b) Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3. Our Products are designed and manufactured for use under standard conditions and not under any special or
extraordinary environments or conditions, as exemplified below. Accordingly, KIONIX shall not be in any way
responsible or liable for any damages, expenses or losses arising from the use of any KIONIX’s Products under
any special or extraordinary environments or conditions. If you intend to use our Products under any special or
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation
of product performance, reliability, etc., prior to use, must be necessary:
a) Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
b) Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
c) Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
d) Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
e) Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
f) Sealing or coating our Products with resin or other coating materials
g) Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
h) Use of the Products in places subject to dew condensation
4. The Products are not subject to radiation-proof design.
5. Please verify and confirm characteristics of the final or mounted products in using the Products.
6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying
36 Thornwood Dr. – Ithaca, NY 14850
tel: [phone] – fax:[phone]
www.kionix.com - [e-mail]
© 2015 Kionix – All Rights Reserved
Page 72 of 75