W77E532 Datasheet, PDF (15/86 Pages) Winbond – 8 BIT MICROCONTROLLER

W77E532/W77E532A
WD1
0
0
1
1
WD0
0
1
0
1
INTERRUPT TIME-OUT
2¹⁷
2²⁰
2²³
2²⁶
RESET TIME-OUT
2¹⁷ + 512
2²⁰ + 512
2²³ + 512
2²⁶ + 512
T2M: Timer 2 clock select: When T2M is set to 1, timer 2 uses a divide by 4 clock, and when set to
0 it uses a divide by 12 clock.
T1M: Timer 1 clock select: When T1M is set to 1, timer 1 uses a divide by 4 clock, and when set to
0 it uses a divide by 12 clock.
T0M: Timer 0 clock select: When T0M is set to 1, timer 0 uses a divide by 4 clock, and when set to
0 it uses a divide by 12 clock.
MD2−0: Stretch MOVX select bits: These three bits are used to select the stretch value for the MOVX
instruction. Using a variable MOVX length enables the user to access slower external memory
devices or peripherals without the need for external circuits. The RD or WR strobe will be
stretched by the selected interval. When accessing the on-chip SRAM, the MOVX instruction
is always in 2 machine cycles regardless of the stretch setting. By default, the stretch has
value of 1. If the user needs faster accessing, then a stretch value of 0 should be selected.
MD2 MD1 MD0 Stretch value
MOVX duration
000
0
001
1
010
2
011
3
100
4
101
5
110
6
111
7
2 machine cycles
3 machine cycles (Default)
4 machine cycles
5 machine cycles
6 machine cycles
7 machine cycles
8 machine cycles
9 machine cycles
- 15 -
Publication Release Date: June 30, 2009
Revision A10