NT5DS64M4AT Datasheet, PDF (44/78 Pages) List of Unclassifed Manufacturers – 256Mb Double Data Rate SDRAM

NT5DS64M4AT NT5DS64M4AW
NT5DS32M8AT NT5DS32M8AW
256Mb Double Data Rate SDRAM
Precharge Command
CK
CK
CKE
CS
HIGH
RAS
CAS
WE
A0-A9, A11, A12
A10
BA0, BA1
All Banks
One Bank
BA
BA = bank address
(if A10 is Low, otherwise Don’t Care).
Don’t Care
Precharge
The Precharge command is used to deactivate the open row in a particular bank or the open row in all banks. The
bank(s) is available for a subsequent row access some specified time (t_RP) after the Precharge command is
issued. Input A10 determines whether one or all banks are to be precharged, and in the case where only one bank
is to be precharged, inputs BA0, BA1 select the bank. When all banks are to be precharged, inputs BA0, BA1 are
treated as “Don’t Care.” Once a bank has been precharged, it is in the idle state and must be activated prior to any
Read or Write commands being issued to that bank.
REV 1.1
12/2001
44
© NANYA TECHNOLOGY CORP. All rights reserved.
NANYA TECHNOLOGY CORP. reserves the right to change Products and Specifications without notice.