NT5DS64M4AT Datasheet, PDF (12/78 Pages) List of Unclassifed Manufacturers – 256Mb Double Data Rate SDRAM

NT5DS64M4AT NT5DS64M4AW
NT5DS32M8AT NT5DS32M8AW
256Mb Double Data Rate SDRAM
Operating Mode
The normal operating mode is selected by issuing a Mode Register Set Command with bits A7-A12 to zero, and bits A0-A6 set
to the desired values. A DLL reset is initiated by issuing a Mode Register Set command with bits A7 and A9-A12 each set to
zero, bit A8 set to one, and bits A0-A6 set to the desired values. A Mode Register Set command issued to reset the DLL should
always be followed by a Mode Register Set command to select normal operating mode.
All other combinations of values for A7-A12 are reserved for future use and/or test modes. Test modes and reserved states
should not be used as unknown operation or incompatibility with future versions may result.
CAS Latencies
CK
CK
Command
DQS
DQ
Read
NOP
CL=2
NOP
CAS Latency = 2, BL = 4
NOP
NOP
NOP
CK
CK
Command
DQS
DQ
Read
NOP
CL=2.5
NOP
Shown with nominal t_AC, t_DQSCK, and t_DQSQ.
CAS Latency = 2.5, BL = 4
NOP
NOP
NOP
Don’t Care
REV 1.1
12/2001
12
© NANYA TECHNOLOGY CORP. All rights reserved.
NANYA TECHNOLOGY CORP. reserves the right to change Products and Specifications without notice.