OXCB950 Datasheet, PDF (10/68 Pages) List of Unclassifed Manufacturers – Integrated High Performance UART Cardbus / PCI interface

OXFORD SEMICONDUCTOR LTD.
OXCB950
Pinout Assignment
This device implements the “common” silicon requirements given in the PC Card Standard, release 7.x.
The pinouts for this device have been assigned specifically to align the cardbus signals to the cardbus connector without any
signal crossovers. Since the assignment of signal pins on the cardbus connector is in a different sequence than those on the PCI
connector (due to the limitations of the cardbus connector) then for the PCI environment signal crossovers do inevtiably occur.
The following signal lines are affected for the PCI environment : SERR#, AD16, INTA, CLK, and RST#.
Data Sheet Revision 1.1
Page 10