AKD4955-A Datasheet, PDF (45/89 Pages) Asahi Kasei Microsystems – AK4955 Evaluation Board Rev.3

[AKD4955-A]
13-4. 5-BandEQ operation on Filter Plot screen
When EQ (1~5) is turning on, a green number is displayed on the Filter Plot dialog box.
This number shows the setting of the center frequency and the gain of each EQ.
The number under the display is operated with the mouse, and it is possible to set the filter characteristic
on this screen.
The center frequency and the gain setting are changed by moving the mouse while left-clicking.
The setting of the bandwidth is changed by moving the mouse while right-clicking.
After operating the mouse
The value of the center frequency
and the gain is updated.
The number is selected.
The movement operation is done
while left-clicking.
Figure 54.Filter Setting (Left-clicking operation)
<KM104703>
After operating the mouse
The value of the bandwidth is updated.
Figure 55.Filter Setting (Right-clicking operation)
- 45 -
2011/08