AKD4955-A Datasheet, PDF (2/89 Pages) Asahi Kasei Microsystems – AK4955 Evaluation Board Rev.3

„ Operation Sequence
1) Set up the Power Supply Lines.
2) Setup the Audio I/F Evaluation Mode.
(1) Evaluation of A/D using DIT of AK4118A.
(1-1) Setting with External Slave Mode.
(1-2) Setting with External Master Mode.
(2) Evaluation of D/A using DIR of AK4118A.
(2-1) Setting with External Slave Mode. < Default >
(2-2) Setting with External Master Mode.
(3) Evaluation of A/D, D/A using PORT3 (DSP).
(3-1) Setting with External Slave Mode.
(3-2) Setting with External Master Mode.
(3-3) Setting with PLL Slave Mode.
(3-4) Setting with PLL Master Mode.
(4) Evaluation of external Loop-back (A/D -> D/A).
(4-1) Setting with External Slave Mode.
(4-2) Setting with External Master Mode.
(4-3) Setting with PLL Slave Mode.
(4-4) Setting with PLL Master Mode.
3) Jumper pins and SW Setting.
(1) Setting of other jumper pins.
(2) Setting of SW.
4) Power on.
[AKD4955-A]
<KM104703>
-2-
2011/08