AKD4955-A Datasheet, PDF (43/89 Pages) Asahi Kasei Microsystems – AK4955 Evaluation Board Rev.3

[AKD4955-A]
13-2. [Register Setting]: Register Setting for Filter Dialog Box
A register set value is displayed when push a [Register Setting] button. When a value out of a setting
range is set, error message is displayed, and a calculation of register setting is not carried out.
Figure 52.A register setting calculation result
Followings are the cases when a register set value is updated.
(1) When [Register Setting] button was pushed.
(2) When [Frequency Response] button was pushed.
(3) When [UpDate] button was pushed on a frequency characteristic indication window.
(4) When set ON/OFF of a check button “Notch Filter Auto Correction”
<KM104703>
- 43 -
2011/08