AKD4955-A Datasheet, PDF (21/89 Pages) Asahi Kasei Microsystems – AK4955 Evaluation Board Rev.3

[AKD4955-A]
■ Tab Functions
1. [Function]: Function control
This tab is for function.
Each operation is executed by [Function] buttons on the left side of the screen (Note 19, Note 20).
Note 19. Please refer to the following setting when you use the “Function” function.
Mode= “External Slave Mode”, fs= “7.35kHz～48kHz”, Audio I/F Format= “24bit MSB justified”
Note 20. The AK4955 should be reset by the PDN pin after the power supplies are applied.
After that, “Dummy Command” should be executed.
Figure 30.Window of [Function]
<KM104703>
- 21 -
2011/08