AKD4955-A Datasheet, PDF (26/89 Pages) Asahi Kasei Microsystems – AK4955 Evaluation Board Rev.3

[AKD4955-A]
3-2. [Loop Setting]: Loop Dialog
Click [Loop Setting] button in the Tool tab to open loop setting dialog as shown below.
Writing test can be executed.
Figure 35.Window of [Loop]
[OK] Button
[Cancel] Button
[Address] Box
[Start Data] Box
[End Data] Box
[Interval] Box
[Step] Box
[Mode Select] Box
: Starts the test.
: Closes the dialog and finishes the process.
: Data writing address in hexadecimal numbers.
: Start data in hexadecimal numbers.
: End data in hexadecimal numbers.
: Data write interval time.
: Data write step interval.
: Mode select check box.
• Checked
[Example]
Data flow
: Writes in step interval from the start data to the end data and turn back from
the end data to the start data.
Start Data = 00, End Data = 05, Step = 1
: 00→01→02→03→04→05→05→04→03→02→01→00
• Not Checked : Writes in step interval from the start data to the end data and finishes writing.
[Example] Start Data = 00, End Data = 05, Step = 1
Data flow : 00→01→02→03→04→05
<KM104703>
- 26 -
2011/08