P0103 Datasheet, PDF (7/50 Pages) AEL Crystals Ltd – Introduction of the VEEK-MT

Table 1-1 General physical specifications of the LCD
Item
Specification
Unit
LCD size
7-inch (Diagonal)
-
Resolution
800 x3(RGB) x 480
dot
Dot pitch
0.1926(H) x0.1790 (V)
mm
Active area
154.08 (H) x 85.92 (V)
mm
Module size
164.9(H) x 100.0(V) x 5.7(D)
mm
Surface treatment
Glare
-
Color arrangement
RGB-stripe
-
Interface
Digital
-
 5-Megapixel Digital Image Sensor
 Superior low-light performance
 High frame rate
 Low dark current
 Global reset release, which starts the exposure of all rows simultaneously
 Bulb exposure mode, for arbitrary exposure times
 Snapshot-mode to take frames on demand
 Horizontal and vertical mirror image
 Column and row skip modes to reduce image size without reducing field-of-view
 Column and row binning modes to improve image quality when resizing
 Simple two-wire serial interface
 Programmable controls: gain, frame rate, frame size, exposure
Table 1-2 shows the key parameters of the CMOS sensor (Note*).
Table 1-2 Key performance parameters of the CMOS sensor
Parameter
Value
Active Pixels
2592Hx1944V
Pixel size
2.2umx2.2um
Color filter array
RGB Bayer pattern
Shutter type
Global reset release(GRR)
Maximum data rate/master clock
96Mp/s at 96MHz
Frame rate
Full resolution Programmable up to 15 fps
VGA mode Programmable up to 70 fps
ADC resolution
12-bit
Responsivity
1.4V/lux-sec(550nm)
VEEK-MT User Manual
4
www.terasic.com
May 20, 2014