P0103 Datasheet, PDF (34/50 Pages) AEL Crystals Ltd – Introduction of the VEEK-MT

 Demonstration Setup
 Connect a DVD player’s composite video output(yellow plug) to the Video-IN RCA jack(J12)
of the VEEK-MT. The DVD player has to be configured to provide NTSC output or PAL
output
 Connect the VGA output of the VEEK-MT to a VGA monitor (both LCD and CRT type of
monitors should work)
 Load the bit stream into FPGA (note*)
 Run the Nios II and choose VIP\Software as the workspace. Click on the Run button (note *)
 Press and drag the video frame box will result in scaling the playing window to any size, as
shown in Figure 4-10
Note:
(1).Executing VIP\demo_batch\ VIP.bat will download .sof and .elf files.
(2).You may need additional Altera VIP suite Megacore license features to recompile the project.
Figure 4-11 illustrates the setup for this demonstration.
Figure 4-10 The VIP demonstration running result
VEEK-MT User Manual
31
www.terasic.com
May 20, 2014