Z8932120PSC Datasheet, PDF (10/40 Pages) Zilog, Inc. – 16-BIT DIGITAL SIGNAL PROCESSORS

Z89321/371/391
16-Bit Digital Signal Processors
ABSOLUTE MAXIMUM RATINGS
Symbol Description
Min.
V_CC
T_STG
T_A
Supply voltage (*)
Storage Temp.
Oper. Ambient Temp.
Ð0.3
Ð65°
Note:
* Voltage on all pins with respect to GND.
See Ordering Information.
Max. Units
+7.0 V
+150 °C
°C
Zilog
Stresses greater than those listed under Absolute Maxi-
mum Ratings may cause permanent damage to the de-
vice. This is a stress rating only; operation of the device at
any condition above those indicated in the operational sec-
tions of these specifications is not implied. Exposure to ab-
solute maximum rating conditions for extended periods
may affect device reliability.
STANDARD TEST CONDITIONS
The characteristics listed below apply for standard test
conditions as noted. All voltages are referenced to
Ground. Positive current flows into the referenced pin (Fig-
ure 6).
+5V
2.1 K W
From Output
Under Test
30 pF
9.1 K W
Figure 6. Test Load Diagram
10
PRELIMINARY
DS97DSP0100