DS593 Datasheet, PDF (3/35 Pages) Xilinx, Inc – Includes innovative FPGA-based acceleration

Platform Cable USB II
Physical Description
The Platform Cable USB II electronics are housed in a recyclable, fire-retardant plastic case (Figure 2). An internal EMI
shield attenuates internally generated emissions and protects against susceptibility to radiated emissions.
X-Ref Target - Figure 2
Top View
RCooHmSpliant
HI-SPEED
USB ^CERTIFIED
®
2mm
CONNECTOR
Platform Cable USB II ^SIGNALS
JTAG or Serial or SPI
Model DLC10
HALT INIT WP
Power 5V
0.15A
----
TDI
---- ----
DIN MOSI
Serial XU - 12345
TDO DONE MISO
TCK CCLK SCK
TMS PROG SS
VREF VREF VREF
PGND
Gnd
Gnd
Gnd
Gnd
Gnd
----
Made in U.S.A.
1.5 < VREF < 5.0 VDC
STATUS
53.3 mm
Side View
25.4 mm
115.6 mm
16.5 mm
Figure 2: Plastic Case Physical Description
DS593_02_021908
Operation
This section describes how to connect and use Platform Cable USB II.
Minimum Host System Requirements
The host computer must contain a USB Host Controller with one or more USB ports. The controller can reside on the PC
motherboard, or can be added using an expansion or PCMCIA card.
Platform Cable USB II is designed to take full advantage of the bandwidth of USB 2.0 ports, but it is also backward-
compatible with USB 1.1 ports. Refer to USB Hub Types and Cable Performance, page 28 for additional information on
connection environments and bandwidth.
Table 1 lists Platform Cable USB II compatibility with the Xilinx design tools.
DS593 (v1.2.1) March 17, 2011
www.xilinx.com
3