W83627HF Datasheet, PDF (171/185 Pages) Winbond – WINBOND I/O

W83627HF/F
CRF3 (SUSLED mode register. Default 0x00)
Bit 7-6: select Suspend LED mode
= 00 Suspend LED pin is drived low.
= 01 Suspend LED pin is tri-stated.
= 10 Suspend LED pin is a 1Hz toggle pulse with 50 duty cycle.
= 11 Suspend LED pin is a 1/4Hz toggle pulse with 50 duty cycle.
This mode selection bit 7-6 keep its settings until battery power loss.
Bit 5 - 0: Reserved.
PRELIMINARY
13.11 Logical Device A (ACPI)
CR30 (Default 0x00)
Bit 7 - 1: Reserved.
Bit 0: = 1 Activates the logical device.
= 0 Logical device is inactive.
CR70 (Default 0x00)
Bit 7 - 4: Reserved.
Bit 3 - 0: These bits select IRQ resources for PME .
CRE0 (Default 0x00)
Bit 7: DIS-PANSW_IN. Disable panel switch input to turn system power supply on.
= 0 PANSW_IN is wire-ANDed and connected to PANSW_OUT.
= 1 PANSW_IN is blocked and can not affect PANSW_OUT.
Bit 6: ENKBWAKEUP. Enable Keyboard to wake-up system via PANSW_OUT.
= 0 Disable Keyboard wake-up function.
= 1 Enable Keyboard wake-up function.
Bit 5: ENMSWAKEUP. Enable Mouse to wake-up system via PANSW_OUT.
= 0 Disable Mouse wake-up function.
= 1 Enable Mouse wake-up function.
Bit 4: MSRKEY. Select Mouse Left/Right Botton to wake-up system via PANSW_OUT.
= 0 Select click on Mouse Left-botton twice to wake the system up.
= 1 Select click on Mouse right-botton twice to wake the system up.
- 153 -
Publication Release Date: Jul 1999
Revision 0.53