W83627HF Datasheet, PDF (120/185 Pages) Winbond – WINBOND I/O

W83627HF/F
11.7 REGISTERS AND RAM
11.7.1 Address Register (Port x5h)
Data Port:
Port x5h
Power on Default Value
00h
Attribute:
Bit 6:0 Read/write , Bit 7: Read Only
Size:
8 bits
7 6 5 4 32 1 0
PRELIMINARY
Data
Bit7: Read Only
The logical 1 indicates the device is busy because of a Serial Bus transaction or another LPC
bus transaction. With checking this bit, multiple LPC drivers can use W83627HF hardware
monitor without interfering with each other or a Serial Bus driver.
It is the user's responsibility not to have a Serial Bus and LPC bus operations at the same time.
This bit is:
Set: with a write to Port x5h or when a Serial Bus transaction is in progress.
Reset: with a write or read from Port x6h if it is set by a write to Port x5h, or when the Serial Bus
transaction is finished.
Bit 6-0: Read/Write
Bit 7
Busy
(Power On default 0)
Bit 6
A6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Address Pointer (Power On default 00h)
A5
A4
A3
A2
A1
Bit 0
A0
- 103 -
Publication Release Date: Jul 1999
Revision 0.53