W83627HF Datasheet, PDF (134/185 Pages) Winbond – WINBOND I/O

W83627HF/F
11.7.21 BEEP Control Register 1-- Index 56h (Bank 0)
Register Location:
56h
Power on Default Value
00h
Attribute:
Read/Write
Size:
8 bits
7 65432 1 0
EN_VCA_BP
EN_VCB_BP
EN_V33_BP
EN_V5_BP
EN_T1_BP
EN_T2_BP
EN_FAN1_BP
EN_FAN2_BP
PRELIMINARY
Bit 7: Enable BEEP Output from FAN 2 if the monitor value exceed the limit value. Write 1, enable
BEEP output, which is default value.
Bit 6: Enable BEEP Output from FAN 1 if the monitor value exceed the limit value. Write 1, enable
BEEP output, which is default value.
Bit 5: Enable BEEP Output from Temperature Sensor 2 if the monitor value exceed the limit value.
Write 1, enable BEEP output. Default 0
Bit 4: Enable BEEP output for Temperature Sensor 1 if the monitor value exceed the limit value.
Write 1, enable BEEP output. Default 0
Bit 3: Enable BEEP output from VDD (+5V), Write 1, enable BEEP output if the monitor value exceed
the limits value. Default 0, that is disable BEEP output.
Bit 2: Enable BEEP output from +3.3V. Write 1, enable BEEP output, which is default value.
Bit 1: Enable BEEP output from VCOREB. Write 1, enable BEEP output, which is default value.
Bit 0: Enable BEEP Output from VCOREA if the monitor value exceed the limits value. Write 1,
enable BEEP output, which is default value
11.7.22 BEEP Control Register 2-- Index 57h (Bank 0)
Register Location:
57h
Power on Default Value 80h
Attribute:
Read/Write
Size:
8 bits
- 117 -
Publication Release Date: Jul 1999
Revision 0.53