W632GU6KB Datasheet, PDF (131/160 Pages) Winbond – 16M X 8 BANKS X 16 BIT DDR3L SDRAM

W632GU6KB
10.13.2 IDD Current Specifications
Speed Bin
DDRL3-1333 DDR3L-1600 DDR3L-1866
SYM.
Part Number Extension
-15/15I
-12/12I
-11
UNIT
DEFINITION
MAX.
MAX.
MAX.
IDD0 Operating One Bank Active-Precharge Current
100
105
115
mA
IDD1
Operating One Bank Active-Read-Precharge
Current
125
130
140
mA
IDD2N Precharge Standby Current
65
70
80
mA
IDD2NT Precharge Standby ODT Current
100
105
110
mA
IDD2P0 Precharge Power Down Current Slow Exit
19
19
19
mA
IDD2P1 Precharge Power Down Current Fast Exit
48
50
55
mA
IDD2Q Precharge Quiet Standby Current
65
70
75
mA
IDD3N Active Standby Current
70
75
80
mA
IDD3P Active Power Down Current
55
60
65
mA
IDD4R Operating Burst Read Current
235
250
280
mA
IDD4W Operating Burst Write Current
200
220
250
mA
IDD5B Burst Refresh Current
145
150
155
mA
IDD6 Self-Refresh Current, TOPER = 0 - 85°C
19
19
19
mA
IDD6ET Self-Refresh Current, TOPER = 0 - 95°C
21
21
21
mA
IDD7 Operating Bank Interleave Read Current
370
380
400
mA
IDD8 RESET# Low Current
19
19
19
mA
Notes:
1. Max. values for IDD currents consider worst case conditions of process, temperature and voltage.
2. The IDD values must be derated (increased) when operated outside the range 0°C ≤ TCASE ≤ 85°C:
(a) When TCASE < 0°C: IDD2P0, IDD2P1 and IDD3P must be derated by 4%; IDD4R and IDD5W must be derated by 2%; and
IDD6, IDD6ET and IDD7 must be derated by 7%.
(b) When TCASE > 85°C: IDD0, IDD1, IDD2N, IDD2NT, IDD2Q, IDD3N, IDD3P, IDD4R, IDD4W, and IDD5B must be derated by
2%; and IDD2P0, IDD2P1 must be derated by 30%.
- 131 -
Publication Release Date: Jan. 20, 2015
Revision: A06