LM3S2276 Datasheet, PDF (749/785 Pages) Texas Instruments – Stellaris® LM3S2276 Microcontroller

Stellaris® LM3S2276 Microcontroller
ROM_UARTConfigGetExpClk
// Gets the current configuration of a UART.
ROM_UARTConfigSetExpClk
// Sets the configuration of a UART.
ROM_UARTDisable
// Disables transmitting and receiving.
ROM_UARTDisableSIR
// Disables SIR (IrDA) mode on the specified UART.
ROM_UARTEnable
// Enables transmitting and receiving.
ROM_UARTEnableSIR
// Enables SIR (IrDA) mode on specified UART.
ROM_UARTFIFOLevelGet
// Gets the FIFO level at which interrupts are generated.
ROM_UARTFIFOLevelSet
// Sets the FIFO level at which interrupts are generated.
ROM_UARTIntClear
// Clears UART interrupt sources.
ROM_UARTIntDisable
// Disables individual UART interrupt sources.
ROM_UARTIntEnable
// Enables individual UART interrupt sources.
ROM_UARTIntStatus
// Gets the current interrupt status.
ROM_UARTParityModeGet
// Gets the type of parity currently being used.
ROM_UARTParityModeSet
// Sets the type of parity.
ROM_UARTSpaceAvail
// Determines if there is any space in the transmit FIFO.
ROM_UpdateI2C
// Starts an update over the I2C0 interface.
ROM_UpdateSSI
// Starts an update over the SSI0 interface.
ROM_UpdateUART
// Starts an update over the UART0 interface.
November 17, 2011
749
Texas Instruments-Production Data