LM3S2276 Datasheet, PDF (207/785 Pages) Texas Instruments – Stellaris® LM3S2276 Microcontroller

Stellaris® LM3S2276 Microcontroller
Bit/Field
9:8
7
6
5
4
3
2
1
0
Name
MAXADCSPD
MPU
HIB
TEMPSNS
PLL
WDT
SWO
SWD
JTAG
Type
RO
RO
RO
RO
RO
RO
RO
RO
RO
Reset
0x3
Description
Max ADC Speed. This field indicates the maximum rate at which the
ADC samples data.
Value Description
0x3 1M samples/second
1
MPU Present. When set, indicates that the Cortex-M3 Memory Protection
Unit (MPU) module is present. See the "Cortex-M3 Peripherals" chapter
in the Stellaris Data Sheet for details on the MPU.
1
Hibernation Module Present. When set, indicates that the Hibernation
module is present.
1
Temp Sensor Present. When set, indicates that the on-chip temperature
sensor is present.
1
PLL Present. When set, indicates that the on-chip Phase Locked Loop
(PLL) is present.
1
Watchdog Timer Present. When set, indicates that a watchdog timer is
present.
1
SWO Trace Port Present. When set, indicates that the Serial Wire Output
(SWO) trace port is present.
1
SWD Present. When set, indicates that the Serial Wire Debugger (SWD)
is present.
1
JTAG Present. When set, indicates that the JTAG debugger interface
is present.
November 17, 2011
207
Texas Instruments-Production Data