LM3S2276 Datasheet, PDF (42/785 Pages) Texas Instruments – Stellaris® LM3S2276 Microcontroller

Architectural Overview
• Runs in Down or Up/Down mode
• Output frequency controlled by a 16-bit load value
• Load value updates can be synchronized
• Produces output signals at zero and load value
– Two PWM comparators
• Comparator value updates can be synchronized
• Produces output signals on match
– PWM generator
• Output PWM signal is constructed based on actions taken as a result of the counter and
PWM comparator output signals
• Produces two independent PWM signals
– Dead-band generator
• Produces two PWM signals with programmable dead-band delays suitable for driving a
half-H bridge
• Can be bypassed, leaving input PWM signals unmodified
– Flexible output control block with PWM output enable of each PWM signal
• PWM output enable of each PWM signal
• Optional output inversion of each PWM signal (polarity control)
• Optional fault handling for each PWM signal
• Synchronization of timers in the PWM generator blocks
• Extended PWM synchronization of timer/comparator updates across the PWM generator
blocks
• Interrupt status summary of the PWM generator blocks
• Extended PWM fault handling, with multiple fault signals, programmable polarities, and
filtering
– Can initiate an ADC sample sequence
■ Power
– On-chip Low Drop-Out (LDO) voltage regulator, with programmable output user-adjustable
from 2.25 V to 2.75 V
– Hibernation module handles the power-up/down 3.3 V sequencing and control for the core
digital logic and analog circuits
42
November 17, 2011
Texas Instruments-Production Data