DS90UH949-Q1 Datasheet, PDF (74/87 Pages) Texas Instruments – 1080p HDMI to FPD-Link III Bridge Serializer with HDCP

DS90UH949-Q1
SNLS453 – NOVEMBER 2014
Typical Applications (continued)
www.ti.com
Graphics
Processor
HDMI
VDDIO
1.8V
1.8V 1.1V
IN_CLK-/+
IN_D0-/+
IN_D1-/+
IN_D2-/+
CEC
DDC
HPD
DOUT0+
DOUT0-
DOUT1+
DOUT1-
DS90UH949-Q1
Serializer
FPD-Link III
2 Lane
3.3V 1.2V
VDDIO
(3.3V / 1.8V)
RIN0+
RIN0-
RIN1+
RIN1-
DS90UH948-Q1
Deserializer
I2C
IDx
D_GPIO
(SPI)
HDCP ± High-Bandwidth Content Protection
HDMI ± High Definition Multimedia Interface
I2C
IDx
D_GPIO
(SPI)
Figure 27. Typical System Diagram
FPD-Link
(Open LDI)
CLK+/-
D0+/-
D1+/-
D2+/-
D3+/-
CLK2+/-
D4+/-
D5+/-
D6+/-
D7+/-
LVDS
Display
1080p60
or Graphic
Processor
9.2.1 Design Requirements
The SER/DES supports only AC-coupled interconnects through an integrated DC-balanced decoding scheme.
External AC coupling capacitors must be placed in series in the FPD-Link III signal path as illustrated in
Figure 28.
Table 11. Design Parameters
DESIGN PARAMETER
VDDIO
AC Coupling Capacitor for DOUT0± and DOUT1± with 92x
deserializers
AC Coupling Capacitor for DOUT0± and DOUT1± with 94x
deserializers
EXAMPLE VALUE
1.8V
100nF
33nF
For applications utilizing single-ended 50Ω coaxial cable, the unused data pins (DOUT0-, DOUT1-) should utilize
a 15nF capacitor and should be terminated with a 50Ω resistor.
SER
D_OUT+
D_OUT-
R_IN+
R_IN-
DES
Figure 28. AC-Coupled Connection (STP)
SER
D_OUT+
R_IN+
DES
D_OUT-
503
503
R_IN-
Figure 29. AC-Coupled Connection (Coaxial)
For high-speed FPD–Link III transmissions, the smallest available package should be used for the AC coupling
capacitor. This will help minimize degradation of signal quality due to package parasitics.
74
Submit Documentation Feedback
Product Folder Links: DS90UH949-Q1
Copyright © 2014, Texas Instruments Incorporated