HD3SS3220_15 Datasheet, PDF (7/43 Pages) Texas Instruments – HD3SS3220 USB Type-C DRP Port Controller with SuperSpeed 2:1 MUX

www.ti.com
Electrical Characteristics (continued)
over operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
V_M
Mid-Level (Floating) voltage (PORT, ADDR and
CURRENT_MODE pins)
V_IH
I_IH
I_IL
I_ID(LKG)
R_(pu)
High-level input voltage
High-level input current
Low-level input current
Current Leakage on ID pin
Internal pull-up resistance (PORT and ADDR
pins)
VDD5 = 0 V, ID = 5 V
R_(pd)
Internal pull-down resistance (PORT and
ADDR pins)
R_{(pd_CURRENT)}
Internal pull-down resistance
(CURRENT_MODE pin)
R_{(ENn_CC)}
Internal pull-up resistance (ENn_CC pin)
Input Pins: ENn_MUX
V_IL
Low-level input voltage
V_IH
High-level input voltage
I_IH
High-level input current
I_IL
Low-level input current
Open Drain Output Pins: OUT1, OUT2, INT_N/OUT3, ID, VCONN_FAULT_N, DIR
V_OL
Low-level signal output voltage
I_OL = –1.6 mA
I2C– SDA/OUT1, SCL/OUT2 can Operate from 1.8/3.3 V (±10%)⁽¹⁾
V_IH
High-level input voltage
V_IL
Low-level input voltage
V_OL
Low-level output voltage (open-drain)
VBUS_DET IO Pin (Connected to System VBUS Signal)
I_OL = –1.6 mA
V_{(BUS_THR)}
R_{(VBUS_DET_INT)}
VCONN
VBUS threshold range
Internal pull-down resistor at VBUS_DET pin
R_ON
V_(TOL)
V_(pass)
I_(VCONN)
On resistance of the VCONN power FET
Voltage tolerance on VCONN power FET
Voltage to pass through VCONN power FET
VCONN current limit. VCONN will be
disconnected above this value
MUX High Speed Performance Parameters
f = 0.3 Mhz
I_L
Differential Insertion Loss
f = 2.5 Ghz
f = 5 Ghz
BW
Bandwidth
f = 0.3 Mhz
R_L
Differential return loss
f = 2.5 Ghz
f = 5 Ghz
f = 0.3 Mhz
O_IRR
Differential OFF isolation
f = 2.5 Ghz
f = 5 Ghz
f = 0.3 Mhz
X_TALK
Differential Cross Talk
f = 2.5 Ghz
f = 5 Ghz
R_ON
On resistance
(1) When using 3.3 V for I²C, customer must ensure VDD is above 3 V at all times.
HD3SS3220
SLLSES1 – DECEMBER 2015
MIN
0.28 x
VDD5
VDD5 - 0.3
20
–10
0.7 x
VCC33
–1
–1
1.05
2.95
225
TYP
MAX UNIT
0.56 x
VDD5
V
VDD5
V
20
µA
10
µA
10
µA
588
kΩ
1.1
MΩ
275
kΩ
1.1
MΩ
0.3 x
VCC33
V
V
1
µA
1
µA
0.4
V
V
0.4
V
0.4
V
3.3
3.8
V
95
kΩ
1.25
Ω
5.5
V
5.5
V
300
375
mA
–0.43
–1.07
–1.42
8
–27
–9
–9
–79
–23
–20
–89
–34
–30
dB
Ghz
dB
dB
dB
8
Ω
Copyright © 2015, Texas Instruments Incorporated
Product Folder Links: HD3SS3220
Submit Documentation Feedback
7